Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

 
Short Description

RESTRICTED - NEEDS CONFIRMATION - KNOWMAN-114

Air Emissions from vessels can be defined as gases any emissions discharged into the air from the internal main combustion engine, generators, boilers, etc. for example, carbon monoxide, nitrogen oxide, nitrogen dioxidecarbon dioxide, nitrogen oxides, sulfur dioxideoxides, etc. On specific emissions produced by a vessel there are charges (or emission fees).

The Air Emissions module is designed to enable users to calculate and identify not only the total emission quantity a vessel or fleet produces, but also the respective amount and total cost of each generated emission type from a vessel or fleet. Calculations are possible for a broad range of different emissions , for example based on various fuel and consumption data, . This enables the exact amount of for example NOx, SOX, CO2, etc., produced identification of produced emissions by a fleet or vessel can be identified.To calculate for example and supports calculation of the different kinds of air emissions generated from the main engine, generators and boilers on board. To calculate a vessel’s emissions, the fuel type/s, the emission factor of each specified emission type of each fuel type (ex. FO High Sulphur) for each vessel and emission type MUST be entered in the Air Emissions tab and the emission fees in the Air Emission Fees tab. An emission factor can be defined a measure of the average amount of a fuel an emission, expressed in pounds or kilograms of particulate per metric tonne of the fuel burned.

It is also possible to use the module to produce automated reports, for example, Yearly Fleet Emission, Detailed Voyage Emission, Monthly/Quarterly Reports (Prorated Emissions), Official Emission Tax Reports, etcyearly/monthly/quarterly. Once issued, the reports can be sent directly to a business partner or appropriate government body. The module can also be utilised to monitor a fleet’s environmental footprint to enable a reduction of greenhouse gas emissions.

The Air Emissions module is represented by the Air Emissions- and Air Emission Fees tabs in the Vessel Administration module. In the Air Emissions tab the different emission types can be entered and in the Air Emission Fees tab various emission fees can be entered. Emission fees are defined and linked to an emission type in the Emission Fees module in Master Data. The Emission Fee Types module holds information about the five emission types currently supported (and maintained) by Dataloy.
Chapter Contentsdifferent user defined fee types.

Chapters:

Table of Contents
maxLevel4
minLevel64
absoluteURLtrue
typeflat

Long Description

...

Enter Air Emissions

...

Details

  1. Go to Modules > Master Data > Vessel Administration. The Vessel Administration window will openopens.
  2. Select vessel in the left-hand menu tree. Its fields will appear appears to the right.
  3. Click the Air Emissions tab. Its fields will displaydisplays.
  4. Click Create New. A blank row will appear displays in the upper yab window tab field and its blank fileds fields in the lower.

    Example:



  5. Fill in the fields as follows:
    1. Enter either
      1. the emission type under Emission Type
      2. or
      1. click the Triple Dot Selector next to the field. A pop-up with a list of input values
      will appear
      1. opens. Select field and click OK.

        Example:

        Image Modified

    2. Enter the emission factor under Emission Factor.
    3. Enter the bunker category under Bunker Category.
    4. Enter either
      1. a valid from date under Valid From Date
      2. or
      1. click the Triple Dot Selector next to the field. A pop-up calendar to select date
      will appear
      1. opens. Select date and click OK.
      Example:

      1. Image Modified

  6. Click Save. The new emission details will appear displays in the blank row in the upper tab windowfield.
  7. To continue adding a vessel - return to Vessel Administration.

...

Edit an

...

Emission

  1. Go to Modules > Master Data > General Master Data Administration. The General Master Data Administration window will openopens.

  2. Click vessel to be edited in the left-hand menu tree. Its fields will display displays to the right.

  3. Click the Air Emissions tab and its fileds will fields display.
  4. Click the emission row to be edited - it will highlight.

  5. Edit as appropriate the fields displayed in the lower right-hand field.

  6. Click Save.

...

Remove an

...

Emission

  1. Go to Modules > Master Data > Vessel Administration. The Vessel Administration window will openopens.
  2. Click vessel with the emission to be removed in the left-hand menu tree. Its fields will display displays to the right.
  3. Click the Air Emissions tab and its fileds will fields display.
  4. Click the emission row to be removed - it will highlight.
  5. Click Remove. A pop-up appears opens asking to confirm deletion.
  6. Click Yes. The pop-up will vanish close and the selected row is removed.

...

Enter Air Emission Fees

...

Details

  1. Go to Modules > Master Data > Vessel Administration. The Vessel Administration window will openopens.
  2. Select vessel in the left-hand menu tree. Its fields will appear displays to the right.
  3. Click the Air Emission Fees tab. Its fields will display.
  4. Click Add Fee.
  5. A pop-up with a list of emission fees (defined in the Emission Fees module) will appear opens. Select field and click OK.

    Example:



  6. The added emission fee will appear displays as a highlighted row in the upper tab window field and its field fields in the lower.

    Example:



  7. Enter either
    1. the valid from date under Valid From Date
    2. or click the Triple Dot Selector next to the field. A pop-up calendar to select date will appearopens. Select date and click OK.
      Example:



       
  8. The pop-up will close and the entered valid from date will appear displays under Valid From in the highlighted emission fee row.

    Example:



  9. To continue adding a vessel - return to Vessel Administration.

To remove an emission fee

Remove an Emission Fee

  1. Go to Modules > Master Data > Vessel Administration. The Vessel Administration window will openopens.
  2. Click vessel with the emission type to be removed in the left-hand menu tree. Its fields will display to the right.
  3. Click the Air Emission Fees tab and its fileds will fields display.
  4. Click the emission type row to be removed - it will highlight.
  5. Click Remove. A pop-up appears opens asking to confirm deletion.
  6. Click Yes. The pop-up will vanish close and the selected row is removed.

Top
Back

Related Content

Expand to see related content