Page Comparison

...

1. Go to Modules > Master Data > Area Administration. The Area Administration window will openopens.
2. Click Create New. A new row will display displays in the Area Reports field.
   
   Example:
   
   
   
   
3. Click the area report code field and enter the area grouping code (max. three characters) under Area Report Code (RED marking = required field).
4. Tab to/click the area report name field and enter the area grouping name (max. three characters) under Area Report Name. A new area report group is created.
   Note: At least one area report group is required to activate the Area field.
   
   
5. An area report grouping can hold a number user defined geographical areas. An area can be added either by creating a new or by adding an already existing one (areas defined in area report can be added to other area reports).
   
   1. Add either by
      
      1. creating a new area:
         
         1. Click the area report to add an area to.
         2. Click Create New in the Area field. A new row will display displays in the Area field.
            
            Example:
            
            
            
            
         3. Click the area code field and enter the area code under Area Code.
         4. Tab to/click the area description field and enter the area name/description under Area Description. A new area is created.
         5. Go to Step 6.
      2. or by adding an existing area:
         
         1. Click the area report to add an area to.
         2. Click Add Area... in the Area field. A pop-up with a list of areas will openareas opens. Select field and click OK.
            
            Example:
            
            
            
            
         3. The selected input value will display as a new row in the Area field. Go to Step 6.
   2. To edit an area: Click the row to be edited and edit.
   3. To remove an area:
      
      1. Click the area to be removed - it will highlight.

      2. Click Remove. A pop-up will open opens asking to confirm removal.

      3. Click Yes. The pop-up will close and the selected row is removed.
         
         

6. Anchor
   AA1 AA1

   An area can hold a number geographical locations. Add the appropriate locations to each area.
   
   1. To add a location:
      
      1. Click the area to add locations to.
      2. Click the selected location in the left-hand menu tree of the Locations section - it will highlight. The add-to-area arrow button next to the menu tree will activate.
      3. Click the add-to-area arrow button to add the selected location to the area. The location will appear appears as a row in the right-hand field. The field lists all locations added to a selected area.
         
         Example:
         
         
         
         
   2. To exclude a location:
      Note: This option is open when a location area has been added containing a location to be excluded, for example, a country has been added but one (or more) of its port is to be excluded.
      
      1. Click the location to be excluded in the left-hand menu tree - it will highlight.
      2. Click the add-to-area arrow button adding it separately to the area. It will appear appears - highlighted - as a row in the right-hand field.
      3. Check the Exclude box in the location's row. The location has been excluded from the area.
         
         Example:
         
         The country Nigeria (including all its ports and regions) has been added to the area, but the Nigerian port of Lagos has been excluded.
         
         
         
   3. To remove a location:
      
      1. Click the location to be removed in the right-hand field - it will highlight.

      2. Click the remove (trashcan) button to the left. A pop-up will open opens asking to confirm removal.
         
         Example:
         
         
         
         

      3. Click Yes. The pop-up will close and the selected row is removed.

...

Edit an Area Report

1. Go to Modules > Master Data > Area Administration. The Area Administration window will openopens.
2. Click area report row to be edited in the Area Report field - it will highlight.
3. Click the row section to be edited and edit.

...

Delete/Undelete an Area Report

1. To softSoft-delete Delete an area reportArea Report:
   1. Go to Modules > Master Data > Area Administration. The Area Administration window will openopens.
   2. Click area report row to be deleted in the Area Report field - it will highlight.
   3. Click Delete. The selected row will be is soft-deleted only - and remains visible in the Area Report field.
2. To undelete Undelete an area reportArea Report:
   1. Go to Modules > Master Data > Area Administration. The Area Administration window will openopens.
   2. Go to the Deleted tab.
   3. Click the soft-deleted area report row to be restored.
   4. Click Undelete. The row will is move from the Deleted tab to the active Area Administration module.
      
      Example:
      
      
      
      
3. To permanently delete an area reportPermanently Delete an Area Report:
   1. Go to Modules > Master Data > Area Administration. The Area Administration window will open.
   2. Soft-delete the area report to be permanently deleted.
   3. Click the Deleted tab. It will display showing all soft deleted area report rows.
   4. Click the area report row to be deleted - it will highlight.
      
      Example:
      
      
      
      
   5. Click Delete Permanently. A pop-up will open opens asking to confirm deletion.

   6. Click Yes. The pop-up will close and the selected row deleted delete (in both the Active and Deleted tabs).

Top

...

Refresh Port Areas Table

1. Go to Modules > Master Data > Area Administration. The Area Administration window will openopens.
2. Click the Port Areas tab. The Port Areas tab will displaydisplays.
   
   Example:
   
   
   
   
3. Enter the number of records to be refreshed under Max records listed.
   Note: An unlimited number may be entered - but defaults to the first 300 each time the tab is opened. 
   
   Example:
   
   
   
   
4. Click Refresh Port Areas.
   
   
   
   
5. A pop-up will open opens advising that port areas table will be refreshed.
   Note: This may take some time and continuous work on other modules may proceed.
   
   
   
   
6. Click OK. The pop-up will close and refreshment of port areas table will commence illustrated by the bar moving sideways at the bottom of the screen.
   
   Example:
   
   
   
   
7. Once refreshed, the Refreshed Port Areas pop-up opens advising the Port Areas tab has been refreshed.
   
   
   
   
8. Click OK. The pop-up will close and the table has been refreshedtable has been refreshed.

Top
Back

Related Content

{dynamiccontentbylabel:showLabels=false|showSpace=false}