Page Comparison

...

...

Short Description

Dataloy VMS enables users to enter unallocated voyages either via the the Voyage Estimate, Booking and Operations or the COA Planner modules. There are different options available when making a booking, either a new voyage can be created and the cargo to be booked added to it, or an existing voyage can be opened and a cargo can be added to an already existing one, (i.e. a cargo can be booked to be transported by a vessel during the same voyage as another booking).

Unallocated voyages are planned, and often contracted voyages, tht Unallocated voyages of high quality can be generated efficiently in order to plan future voyages and to have them allocated in a timely manner. The unallocated voyages are either based on Scheduled Budget Voyages or created in the Voyage Estimate and Booking and Operations modules.

An unallocated voyage can be defined as planned/contracted voyages to be performed that have yet to be assigned a s vessel. There are is no limit as to how many unallocated voyages can be antered entered and scheduled in the VMS. Any type aof of voyage can be an unallocated voyage, i.e. those with a fixed trade (i.e. has a laycan), contractual voaygesvoyages, ongoingn on-going voyages (no laycan) and "undefined" voyages, i.e. (voyages not yet decided whenor when or with what vessel they are to take place.those withought), etc.

OBS! I SD: definiera budget rsor... as estimate but NOT actual voyages.

Uallokerte reiser er en liste med reiser som ennå ikke er allokert til skip

Ingen begrensninger på hvor mange sånne reiser man kan legge in frem i tid, Disse vil ikke vises i FSP fleet plan - nødt til og/eller ønsker å få plassert 

Unallocated voyages of high quality can be generated efficiently in order to plan future voyages and to have them allocated in a timely manner. The unallocated voyages are either based on Scheduled Budget voyages or created one by one in the Voyage Estimate, Booking and Operations and in the COA Planner modules.

There are four methods to book a cargo:

...

• dsd

  On this screen you can see that there is a red colour on the allocated voyages that means that it's a COA, and we also differentiate between spot voyages and time charters, but this is of course for you to prioritise which voyages are most important.

  VC, TC, har COA, har inte COA.

The To-Make-A-Booking process page provides step-by-step instructions on how to perform a booking by creating an new voyage and adding a cargo and by booking a cargo to an already existing voyage both using the Voyage Estimate module and directly in the Booking and Operations module.

Unallocated used in FSP functionproposes scheduleing witht he most beneficial version available at the top of the displayed Gannt chart. The unallocated voyages can be entered in advance and allocated later.

interface tools to indicate what type of voyage it is.xample blue is a ballast voyageOn this screen you can see that there is a red colour on the allocated voyages that means that it's a COA, and we also differentiate between spot voyages and time charters, but this is of course for you to prioritise which voyages are most important. /in the FSP screen module application the existance of a COA is in the Gantt chart highlöighted  in red text on the allocated voyages.

Prioritet av reiser

Prioritet 1 = Har Laycan (kontraktsforpliktelser)

Prioritet 2 = Ikke definert enda

Prioritet 3 = Uten Laycan

Scheduleringsløsning i FSP: Alle reiser som ikke er påbegynt enda sendes til beregning og kan potensielt endres samt at systemet kan foreslår en omallokering.  

Scheduling utfordring: Alle ballene kastes opp i luften og alle ballene tas ned igjen og omallokeres > kan betyr store endringer => Et behov som vil oppstå: Minimere antall swaps 

Log in

Booking and Operations Module 

Reflekterer hva som vises i FSP

By Vessels

Filter by Trade

Høyre Click - Create unallocated voyages

Kopier lages av reisen og legges under unallocated reiser

 Unallocated (bøtte/liste) Har ligger alle reisene > Her melder commerical inn sitt behov til schedulings avdelingen

Å generere unallocated reiser er likt prosessen hvordan man i dag lager estimate reiser

Process mellom Commercial og Scheduling avdeling:

Tett dialog med commerical i forhold til hvilke reiser som er upcoming

Commercial kommuniserer et behov

Scheduler sier at de trenger reiser

Scheduler i dag: Legger opp alle reiser som vi har comitments og datoer vi må møtes

Kjører første versjon (slack)

Møte med commercial (hvilke muligheter har dere)

Kjører andre versjon (hvordan ser det ut nå?)

Plan legges litt og litt og ting låses underveis

Hvordan lages listen som vises i FSP i VMS?

Commercials behov lages i VMS og vises som behov i Unallocated Voyage

If you have a voyage that is already allocated to a ship but you have a problem with that voyage. So for example: the one that is loading in victoria and discharging in china. The question is then what should we do with this voyage if we try and solve the problem. So you can right click the voyage to un-allocate the voyage and bring it out of the plan so that it will sit in a waiting list of jobs but you can also select “show possible vessels” to ask to see what are the other ships which could potentially help me solve this problem.

Chapter Contents: 

Long Description

How to Enter an Unallocated Voyage using Voysge Estimate

Voyage Charter
Time Charter Out

To create Unallocated voyages in Voyage Estimate: and Booking and Operation modules.

1. Go to Modules > Voyage Estimate
2. Locate the voyage you want to Schedule as a new Unallocated voyage or create New Voyage Charter/Time Charter Out
3. Fill in all the necessary information
4. Go to Voyage > Schedule > Unallocated Voyage

How to Enter an Unallocated Voyage using Booking and Operations

To generate Unallocated voyages based on Scheduled Budget voyages:

1. Go to Modules > Booking and Operations > Booking and Operations
2. Choose the applicable Budget Version in the Vessel list 
3. Locate the voyage you want to generate the Unallocated voyages from and click on Create Unallocated Voyages
4. Once all Unallocated voyages are created a confirmation window will popup

To create Unallocated voyages in Voyage Estimate: and Booking and Operation modules.

1. Go to Modules > Voyage Estimate
2. Locate the voyage you want to Schedule as a new Unallocated voyage or create New Voyage Charter/Time Charter Out
3. Fill in all the necessary information
4. Go to Voyage > Schedule > Unallocated Voyage

To create Unallocated voyages in Booking and Operation module:

1. Go to Modules > Booking and Operations > Booking and Operations
2. Go to Voyage > New > Unallocated Voyage
3. Select applicable Vessel
4. Select applicable Trade
5. Select port calls
6. Click on Create Voyage

Top

How to Enter an Unallocated Voyage using the COA Planner

Top

...

The Create-Unallocated-Voyages Process can be performed through different methods in Dataloy VMS. Either through the:

• Voyage Estimate: 
  • Enter a new estimate and schedule it as an unallocated voyage (both Voyage- and Time Charter).
•  Booking and Operations:
  • Enter a new booking and schedule it as an unallocated voyage (both Voyage- Charter and Time Charter) or base it on an scheduled Budget Voyage.
• COA Planner:
  • Based on scheduled Budget Voyages.

Long Description

Create an Unallocated Voyage (Voyage Charter) using Voyage Estimate

1. Create a new voyage charter or locate and/or copy an existing voyage charter to be scheduled as an unallocated voyage by following the step-by-step instructions at Create a Voyage Charter Calculation/Estimate, Steps 1-8. 
2. If the voyage is
   1. not COA-based: leave LayCan fields of applicable cargo blank in the Cargoes field (for duplicated voyages: delete any existing LayCan dates).
      Note: Laycan fields are to be blank to enable scheduling at whatever date, for example for "dummy-voyages".
      
      Example:
      
      Image Added
      
      
   2. COA-based: Ensure the COA is linked to the estimate (COA field) and enter laycan dates.
3. Go to the Voyage menu and from the drop-down select Schedule > Unallocated Voyage....
   
   Image Added
   
   
4. The Freeze Voyage - Check These Values Before Proceeding pop-up opens.
   
   Example:
   
   Image Added
   
   
5. Fill in the fields as follows (as applicable):
1. Enter either
   1. the name of the company responsible for the voyage under Company Name (MANDATROY)
   2. or click the Triple Dot Selector next to the field. A pop-up with a list of input values opens. Select field and click OK. 
      
      Image Added
      
      
1. The the business unit responsible for the voyage under Business Unit Name (MANDATROY). 
2. Enter the pool responsible for the voyage (if applicable) under Pool Name.
3. Enter applicable trade route under Trade/Pattern.
4. Enter the person responsible for the voyage under under Responsible Charterer.
5. Enter the person responsible for operating the voyage under Responsible Operator.
6. Enter the responsible accountant under Accountant Responsible.
   Note: Defaults to data in Vessel Administration > Internal Data - if entered.
7. Enter the number of days that compose the demurrage timebar (if any) under Demurrage Timebar.
8. Enter the event from which the demurrage timebar should begin under Event.
9. Enter either 
   
   1. the charter party (CP) date under CP Date or
   2. click the Triple Dot Selector next to the field. A pop-up with a calendar opens. Select date and click OK.
      
      Image Added
      
      
10. The Last Voyage for current CP will always by default be disabled when creating an unallocated voyage charter voyage.
11. Enter the vessel earning point under Vessel Earning Point.
    Note: ONLY used to override if the vessel used in the voyage calculation has a different vessel earning point than the intended vessel for the voyage.
    
12. The Vessel IMO No field displays a vessel's IMO number. 
    Note: Disabled by default, i.e. possible to freeze voyage without IMO. To enable - contact Dataloy.
    
13. The Internal Relet section  - leave blank.
    Note: Disabled by default. ONLY activates when a voyage is a Time Charter (TC) In AND the selected business unit when freezing is other than business unit in the TC contract. 
14. Enter the index against which the voyage will be measured (or benchmarked) under TC Benchmark Index.  
15. Enter the percentage of the index a voyage is benchmarked against under Percent.
    Note: Defaults to 100%.
16. Enter applicable Payment terms (if any).
    Note: Payment in a COA linked to the calculation or default payment terms added via the Charterer automatically displays.
1. Enter a payment term for each cargo:
1. If multiple payment terms, enter in per cent the amount to be paid under the first payment term under %.
   Note: If a single payment term - enter 100.
2. Enter applicable payment term under Payment Term.
3. Enter applicable baseline term under Baseline Term.
4. If multiple payment terms, shows in per cent the amount to be paid under the second payment term under %.
   Note: If a single payment term - will show 0.
5. If a second payment term - enter the second payment term under Payment Term 2.
6. If a second payment term - enter the second baseline term under Baseline Term 2.
   
6. Click Proceed. A pop-up opens advising that scheduling the voyage has succeded. Click OK.
7. The voyage calculation automatically moves to the Booking and Operations module as an Unallocated Voyage (i.e. a planned, and often contracted voyage, that has yet to be assigned a vessel, listed under Booking and Operations > Vessel List Tab > Unallocated). 
   Note: Only ONE unallocated voyage can be created at a time. Also, the voyage status indicator in the Voyage Estimate module changes from solid green to “T with purple background" (also referred to as “TCalc”).
   
   Example:
   
   Image Added
   

Top

Create an Unallocated Voyage using Booking and Operations

1. Go to Modules > Booking and Operations > Booking and Operations. The Booking and Operations window opens. 
2. Go to the Voyage Menu > New > Unallocated Voyage.
   
   Image Added
   
   
3. A pop-up opens.
   
   Image Added
   
   
4. Enter either
   1. applicable vessel to create an unallocated voyage for under Vessel
   2. or click the Triple Dot Selector next to the field. A pop-up with a list of input values opens. Select vessel and click OK.
      
      Image Added
      
      
5. Select applicable voyage trade and port calls.
   
   Example:
   
   Image Added
   
   
6. Click Create Voyage.
7. The new unallocated voyage will automatically be listed under Booking and Operations > Unallocated > Applicable Vessel > Vessel List Tab.
   Note: Only ONE unallocated voyage can be created at a time.
   

Top

Generate Unallocated Voyages Based on Scheduled Budget Voyages in Booking and Operations

1. Go to Modules > Booking and Operations > Booking and Operations. The Booking and Operations window opens. 
2. Choose the applicable Budget Version in the Vessel List tab.
3. Locate the voyage to generate an unallocated voyage/s from - its details will display.
4. Click the Scheduled Voyages tab. All (if any) scheduled voyage/s (allocated and unallocated) will display.
5. If voyages are to be generated go to Step 5a. If not, go to Step 6.
1. Either
1. click Add Voyage to add a single blank scheduled voyage to the Scheduled Voyages field
2. or click Auto Schedule... to schedule voyage/s with an endpoint or with fixed intervals:
   
   Image Added
   
   
1. Fill in the fields as follows (as applicable):
   1. If Schedule with fixed endpoints:
      1. Enter the start date under From Date:.
      2. Enter the end date under To Date:.
      3. Enter the number of voyages to be created under Number of Voyages:
      4. Enter the number of laycan days under LayCan Spread:.
   2. If Schedule with fixed intervals:
      1. Enter the start date under From Date:.
      2. Enter the number of voyages to be created under Number of Voyages:
      3. Select the number of interval months from the drop-down menu under Interval.
      4. Enter the number of interval days under Interval.
      5. Enter the number of laycan days under LayCan Spread:.
2. Click Generate. Once generated, a pop-up opens advising the number of generated voyages.
3. Click OK. The number of generated voyages with laycan dates will be added as rows in the Scheduled Voyages field.
6. Locate and click the voyage to create unallocated voyages from.
7. Click Create Unallocated Voyages.
   
   Image Added
   
   
8. A pop-up opens requesting confirmation to create unallocated voyage/s. Click Yes.
9. Once generated, a pop-up opens advising the number of generated voyages. Click OK.
10. The new voyages will display as copies of the voyage it/they were based on - with laycan (if based on a COA, copied from the COA) but without allocated vessel - in the Unallocated List.
    IMPORTANT: If selected "base-voyage" has both allocated and unallocated voyages scheduled, the VMS will ONLY create new unallocated voyages based on existing unallocated voyages - NOT on the allocted ones.  
    
    Example:
    
    Image Added
    

Top

Create Unallocated Voyages Using the COA Planner

1. Go to Modules > Contracts Management > COA Planner tab. The COA Planner tab opens. 
2. Click the COA to be used in the left-hand menu. The COA model voyages displays as a rows in the Model Voyages field.
   Note: By default the top voyage is selected and its scheduled voyages display in the Scheduled Voyages field.
3. Click the voyage to create unallocated voyages from - it will highlight.
4. If voyages are to be generated go to Step 5a. If not, go to Step 6.
5. Either
1. click Add Voyage to add a single blank scheduled voyage to the Scheduled Voyages tab
2. or click Auto Schedule... to schedule voyage/s with an endpoint or with fixed intervals:
   
   Image Added
   
   
1. Fill in the fields as follows (as applicable):
   1. If Schedule with fixed endpoints:
      1. Enter the start date under From Date:.
      2. Enter the end date under To Date:.
      3. Enter the number of voyages to be created under Number of Voyages:
      4. Enter the number of laycan days under LayCan Spread:.
   2. If Schedule with fixed intervals:
      1. Enter the start date under From Date:.
      2. Enter the number of voyages to be created under Number of Voyages:
      3. Select the number of interval months from the drop-down menu under Interval.
      4. Enter the number of interval days under Interval.
      5. Enter the number of laycan days under LayCan Spread:.
2. Click Generate. Once generated, a pop-up opens advising the number of generated voyages.
3. Click OK. The number of generated voyages with laycan dates will be added as rows in the Scheduled Voyages tab.
6. Locate and click the voyage to create unallocated voyages from.
7. Click Create Unallocated Voyages.
   
   Example:
   
   Image Added
   
   
8. A pop-up opens requesting confirmation to create unallocated voyages. Click Yes.
9. Once generated, a pop-up opens advising the number of generated voyages. Click OK.
10. The new voyages display as copies of the voyage it/they were based on - with laycan (if based on a COA, copied from the COA) but without allocated vessel - in the Scheduled Voyages field.
    IMPORTANT: If selected "base-voyage" has both allocated and unallocated voyages scheduled, the VMS will ONLY create new unallocated voyages based on existing unallocated voyages - NOT on the allocted voyages. Generate unallocated voyages are created in the COA Planner, the voyages also automatically appear under Booking and Operations > Applicable Vessel > Unallocated.
    
    Example:
    
    Image Added
    

Top
Back