Page Comparison

Short Description

Long Description

Functions & Features

There are additional specialised features available to aid in latytime calculations, such as Provisional Estimate for Demurrage and Despatch, Laytime Quantity Option, etc., all aimed at increasing effectiveness and accuracy and providing options.

1. Provisional Estimate for Demurrage and Despatch
2. Laytime Quantity Option
3. Total Laytime Option
4. "Fixed feature" Feature - (Cargo, Cargo Port)
5. "Cargo Port Features" - (Add Load Port, Add Discharge Port, Remove, Copy Dates, Paste Dates)
6. Aggregating Criteria for Laytime Calculation for Multiple Cargoes Criteria 
   
   

1. Anchor
   ff1 ff1

   Provisional Estimate for Demurrage and Despatch: Sometimes, before sufficient details about port calls and events have been received to make a full aytime laytime calculation, it might become  necessary to make a provisional estimate in the Laytime Calculation for either demurrage or despatch to make the /wiki/spaces/DLOYPRODUCTS/pages/923506307the Voyage Estimate and result as realistic as possible.
   To make
   Make a provisional estimate:

   1. Open relevant voyage and locate relevant port to make the provisional calculation for.  

   2. In the Cargo field:

      1. Check Fixed beside demurrage and/or despatch (depending on what is being calculated) field/s in the cargo row field.
         Note: This will lock estimated amounts and prevent demurrage/despatch from being recalculated when Recalculate is clicked.

      2. Enter the total demurrage (if any) under Demurrage.

      3. Enter the total despatch (if any) under Despatch (if any). 

   3. In the Cargo Port field:
      
      1. Enter the demurrage details by port in the cargo port row under the Demurrage column.
         Note: Does not automatically accumulate. For information purposes ONLY.
   4. Enter the despatch details by port in the cargo port row under the Despatch column..
      Note: Does not automatically accumulate. For information purposes ONLY.
   5. Click Recalculate.
   6. The provisional estimate is be calculated and appropriate fields in the the Voyage Estimate module are automatically updated with the Laytime Calculations module each time a calculation is refreshed and recalculated, i.e. each time Recalculate is clicked.
      
      

2. Anchor
   ff2 ff2

   Laytime Quantity Option: An extra quantity column called Laytime Qty (Laytime Quantity) can, is located next to the Quantity column in the Cargo Ports field, be located to the right of the Quantity column. Under Quantity, data is automatically retrieves data retrieved from the the Voyage Estimate module. The row fields under Laytime Qty remains blank until data is manually entered. The fields of the column is used when the retrieved data, (originally entered in in Voyage Estimate or from Bill of Lading (B/L)), under Quantity is inaccurate or cannot be used. The Any quantity to be used is entered under Laytime Qty will override any the data stated under Quatity Quantity for the applicable port. This option can be used when for example addding deadfreight to a laytime calculation. Note: Manually entered data under Laytime Qty must be MANUALLY removed.
   
   Example:
   
   Image Modified
   To use the Laytime Quanity Option:
   
4. Open relevant voyage and locate relevant port to make the provisional calculation for.
5. In the Cargo Port field:
   1. Enter the quantity to be used in the cargo port row of applicable cargo under Laytime Qty (Laytime Quantity). 
6. Enter all other relevant details in all other relevant fields to perform the laytime calculation.
7.  Click Recalculate.
 The laytime calculation is refreshed and recalculated.


Anchor
ff3 ff3

Total Laytime Option: The option of stating laytime in actual numbers, for example X number of days or Y number of hours (as opposed to a number/quantity (for example, 10000 MT/day)). The laytime will therefore not vary depending on quantity, but solely on time. The total laytime option can be used for both loading and discharging (typical in tanker scenarios). If the option is used, this is relevant total terms are entered under Terms in either the Charter Party- or Cargo field (depending on if it is for the total of the charter party (CP) or for each cargo individually. The terms in the Cargo Port level will adjust automatically.

Example:

Image Modified


1. Open relevant voyage and locate relevant port to make the provisional calculation for.
2. In the Cargo Port field:
   1. Enter the quantity to be used in the cargo port row of applicable cargo under Laytime Qty (Laytime Quantity). 
3. Enter all other relevant details in all other relevant fields to perform the laytime calculation.
4. Click Recalculate.
5. The laytime calculation is refreshed and recalculated.
   
   

8. Anchor
   ff4 ff4

   "Fixed feature" - (Cargo, Cargo Port): This option allows entered demurrage and/or despatch date to be "locked", i.e. the data entered/calculated will not alter if Recalculate is clicked. There are four Fixed checkboxes, each to the right of the respective demurrage and despatch columns in the Cargo- and Cargo Ports fields. This enables locking demurrage and/or despatch both per cargo and per individual cargo port. This feature can for example be used when provisional estimates for demurrage and/or despatch are being made.
   
   Example:
   
   Image Modified
   
   

9. Anchor
   ff5 ff5

   "Cargo Port Features" - (Add Load Port, Add Discharge Port, Remove, Copy Dates, Paste Dates): These features allows adding/removing load-and discharge ports to a cargo port rotation and the copying and pasting of dates and times to avoid repeated manual entry of the same data. Useful and time-saving, especially when doing calculations on relets where the terms are very similar for charterer and owner.
   
   To open menu: Click a cargo port in the Cargo Port field and right-click the mouse. The menu will display.
   
   Image Modified
   
   
   1. Add Load Port: Adds a new cargo load port to a cargo's port rotation. Displays as a row in the Cargo Port field.
   2. Add Discharge Port: Adds a new cargo discharge port to a cargo's port rotation. Displays as a row in the Cargo Port field.
      Topy dates: Duplicates a selected cargo. Displays as a row in the Cargoes field.
      To paste dates: Duplicates a selected cargo. Displays as a row in the Cargoes field.
      
   3. Remove: Removes a selected cargo port from teh Cargo Ports from a calculation.
   4. Copy Dates: Copies entered date and time.
      1. To copy dates:
         1. Right-click the cargo port with entered dates and times to be copied.
         2. Select Copy Dates.
         3. A copy of all relevant dates, including deductions, for that cargo port is be saved to be entered elsewhere using Paste Dates, for example all the dates from one cargo port can be copied to a second port.
   5.   Paste Dates: Pastes copied dates and times.
      1. To paste dates:
         1. Right-click the cargo port where copied dates and times are to be entered.
         2. Select Paste Dates.
         3. All relevant dates, including deductions, from another copied cargo port will be pasted into the selected cargo port (as applicable).
            
            

10. Anchor
    ff6 ff6

    Aggregating Criteria for Laytime Calculation for Multiple Cargoes Criteria : If a single booking is split into several individual cargoes each will by default be calculated separately in the Laytime module. To calculate one or more of the ports aggregated, the cargoes must updated and meet certain criteria.

    1. Criteria:

       1. Each cargo must belong to the same charter party (CP).
       2. Each of the ports that should be aggregated together must have the "Prorate" check-box ticked.

       3. Enter the demurrage and despatch rate on each of the cargo ports to be aggregated.

       4. Any deductions must be entered under the Cargo Port section.
          Note: It is sufficient to enter all deductions under one of the cargo ports involved.

Tabs

Top

Toolbar

The Laytime Calculations Toolbar is located just above the the tabs, its purpose to aid in navigation and performing essential functions.


      1.

1. Open Voyage...

...

1. Invoicing

...

1. Recalculate

...

1. Show Hours and Minutes/Show Days
   

...

1. Print Laytime Statement

...

1. Anchor
   ff12 ff12

   Open Voyage... opens the Select a Voyage dialogue box which contains all previously entered voyage calculations. Using the filter option, a search can be narrowed down, for each search parameter added, the more detailed the search.
   
   
   
   
   1. To select Select a voyage:
      
      1. Click Open Voyage... The Select a Voyage dialogue box will openopens.
      2. Click the voyage to open - it will highlight.
      3. Click OK.
      4. The dialogue box will close and the voyage will open opens in the Laytime Calculations module.
         Note: Can ONLY open frozen (or actual) voyages and ONLY if there is an existing charter party.
         
         

2. Anchor
   ff13 ff13

   Invoicing: The Invoicing opens a drop-down menu with the selections Accounts Receivable and Accounts Payable. The module allows a user to move from the laytime Laytime module directly to the Accounts Receivable and Accounts Payable menus modules respectively. By default the Laytime Calculations module calculates each cargo individually unless otherwise indicated.
   
   
   

   New Voyage Charter: Opens a new (blank) Voyage Charter Calculation. 
   Note: A new Voyage Charter calculation can also be created by selecting Voyage Menu > New Voyage Charter.

3. New Time Charter Out: Opens a new (blank) Time Charter Calculation. - More information, go to Time Charter. 
   Note: A new Time Charter calculation can also be created by selecting Voyage Menu > New Time Charter.
    
4. TC In Contract...: Is by default deactivated. Only activates if the vessel in the calculation is under a TC In contract. (TC In Contract field (Lower Result panel, Main calculation field) will automatically populate upon vessel name entry stating the charter date. Retrieved from the Time Charter Contracts module). If activated - click to open pop-up with main details of contract (read-only).
    
5. 
   Print: Print 
   1. The Accounts Receivable module will open in a separate tab when selected displaying all receivable invoices (outgoing) per charter party (charterer).
      Note: Despatch, despite being a cost, will register under Accounts Receivable as a negative number because it it a receivable.
      
      1. The Accounts Payable module will open in a separate tab when selected displaying all payable invoices (incoming) per charter party (charterer).
         
         

6. Anchor
   ff14 ff14

   Recalculate: No laytime calculation can be made until the Recalculate button is clicked. Once clicked, the calculation is refreshed and recalculated. Recalculate can be clicked at any time during a calculation, and will calculate on that point the most updated figures. It is also possible to enter multiple data without running a calculation and wait until all required details are entered and then to click Recalculate to perform a single calculation (and no "part calculations"). However, the recalculate function will automatically be performed upon closing the Laytime Calculations module. Appropriate fields in the Voyage Estimate and Booking and Operations modules will also automatically update with the Laytime Calculations module each time the calculation is refreshed and recalculated, i.e. each time Recalculate is clicked.
   
   

7. Anchor
   ff15 ff15

   Show Hours and Minutes/Show Days: Date and time in the Laytime module is either shown in days or in hour and minutes. If the toolbar button states "Show Hours and Minutes" all time and dates is currently displayed in days. Click the button to change and time and dates. The button changes name to "Show Days" and all dates and time will display in hours and minutes. To revert to show time in days, click the button again.
   
    

8. Anchor
   ff16 ff16

   Print Laytime Statement: Print Laytime Statement opens a drop-down menu with the
   selections Voyage and Post Voyage Analysis. The Voyage option generates a report (or voyage printout) of the current status of a voyage calculation (estimate or fixture). It

   selections Print Laytime Statement and Print Old Version. The Print Laytime Statement generates a portion of a timesheet, which details the amount of laytime used by a voyage charterer and display as an electronic printout in PDF-format (separate window). The Laytime Statement print option can be run at any time

   . The Post Voyage Analysis option generates a Post VC Voyage Analysis report (.i.e. either a Preliminary Report displaying all initial estimates or an Adjusted Report showing a breakdown of all actual results of a voyage upon voyage completion depending on if the report is run on a frozen voyage's preliminary or adjusted calculation). The reports can be run at any time during a voyage and will then display the most current and up-to-date results at the time. Note: Applicable for Actual Voyages (or fixtures) ONLY.
   Image Removed
    To generate a voyage printout:
   
9. Open the voyage charter calculation to run a voyage printout on. Its fields will display.
Either
10. click Print and from the drop-down select Voyage
or go to the Voyage menu and from the drop-down select Voyage.
Image Removed
A voyage printout will generate and display

, however BEFORE being run the correct port must be selected BOTH in the Port Call List (Port Call tab) and in the Cargo Port field in order for an accurate statement to be generated. Note: If a cargo has multiple load and/or discharge ports, but is not using Reversible Terms, the VMS will calculate and print each port separately, i.e. when printing a Laytime Statement each port is printed separately. To change this check (where applicable) Reversible and click Recalculate and then print the statement. All cargo ports of the selected cargo will then be inculded in the same laytime statement. ALSO - Although very simple estimations on demurrage can be performed in the Voyage Estimate module, no detailed calculations or statements, for example on dates, deductions, etc.), can be made or printed until the voyage has been frozen and a charter party created in the VMS.


The Print Old Version would generate the same as the Print Laytime Statement, but using an older layout. PLEASE NOTE: The use of  the Print Old Version is currently being DISCONTINUED and will be PHASED OUT.


Image Added
 

1. Generate a laytime statement printout:
   
   1. Open the laytime calculation to run a printout on. Its fields displays. 
   2. Click Print Laytime Statement and from the drop-down select Print Laytime Statement.
      
   3. A laytime statement printout generates and displays as an electronic printout in PDF-format (separate window).
      
      Example:
      Image Removed
      
   To generate a Post Voyage Analysis, go to Post Voyage Analysis. 
   1. 
      Example of an Empty Laytime Statement.
      Image Added
       

...

{dynamiccontentbylabel:showLabels=false|showSpace=false}